Portable and Acurate Superficial Rockwell Hardness Tester PH-1S, Multifunction Portable Hardness Tester

Portable and Acurate Superficial Rockwell Hardness Tester PH-1S, Multifunction Portable Hardness Tester

Introduction

Tests the superficial hardness of metals.

The test principle and accuracy comply to standard ISO6508.

With the bench stand it can be used on the desk as well as on site.

Tests the hardness of thin plate, slim pipe, thin shaft, small ball and small stampings, workpieces with small supporting surface as well as parts requiring small indentation, replacing Vickers hardness tester.

It is used for finished workpiece NDT test directly.The small indentation is on-destructive to most workpieces.

Traceable standard hardness block.

Indenter inspected with standard Rockwell hardness tester.

Test force calibrated with load cells directly traceable to national
   secondary benchmark.

Main Technical Parameters

 Initial Test Force:                3kg

 Total Test Force:                  15kg, 30kg, 45kg

 Force Applying Method:         By screw
 Indenter:                             120°diamond cone
                                             Ф1.588mm carbide ball

 Accuracy:                             Meets the requirements of ISO6508

 Resolution:                           0.5HR

 Testing Range:                     HRN, HRT,HRW, HRX, HRY, etc. 15 scales.

 Application:                          All metals including iron, steel copper, aluminium, zinc, lead, tin, carburized steel, nitrided steel etc.

Standard Package

 Tester
 Bench stand
 120°diamond cone indenter
 Ф1.588mm carbide ball indenter
 3 superficial Rockwell test blocks
 V anvil (small)
 Extension (small)
 Base for standard test block (magnetic)
 Carrying case

Optional Accessories

 120°diamond cone indenter
 Ф1.588mm, Ф3.175mm carbide ball indenter
 Ф1.588mm, Ф6.35mm, Ф12.7mm steel ball indenter
 Standard test blocks (HR15N, HR30N,HR45N, HR15T, HR30T,
   HR45T)

 Raised spot anvil
 Slim raised spot anvil (flat top: Ф1.5mm, Ф2.5mm, Ф3.5mm)
 Diamond raised spot anvil
 Ball testing anvil
 Spare magnifier